Model JYJ 500B
Versatile blower powered by the truck's hydraulics or in a stand-alone version (20 kW electric or 30 hp thermal). A dual-turbine system ensures high pressure without damaging the pellets. Options include a compartmentalized bucket, onboard weighing system, and biodegradable vegetable oil.
Blower hopper equipped for chips
This model can be driven by the truck's hydraulics or by an independent thermal engine.
It can be fitted with a 20kW electric drive or a 30hp thermal drive.
System with one turbine blowing into another to increase the maximum pressure.
The pellets are not damaged because they are not pushed by pressure but carried by the air flow.
The rotary valve is adjusted using a hydraulic flow regulator. On the stand-alone blower, the transmission between the hydraulic pump, the blower and the motor is via multi-strand belts and pulleys, and the pipes are 100mm.
On small trucks everything is hydraulic.
Possibility of installing manual on-board weighing for granules.
Driven via vehicle hydraulics or autonomous (electric or thermal).
Compartmentalized skip for multiple deliveries
Biodegradable vegetable oil
Training | Flat blowing | Flow rate (T/Hour) | Configuration |
Vehicle hydraulics | > 20 | 5 to 10 | On the rear door of a small truck or agricultural trailer |
Hydraulic driven by 20 kW electric motor or 30 hp thermal motor | > 20 | 5 to 10 | Autonomous on chassis with filling hopper |
