top of page
Blower hopper equipped for chips

This model is driven by a PTO shaft of an agricultural tractor rotating at
1000 rpm.

The turbine is composed of 3 reaction blades in the form of a V, specially designed for
granules.

The transmission is done by pulleys and multi-strand belts with a fourfold multiplication.

The suction can be replaced by a hopper.

Suction and outlet are via a 150mm hose.

This JYJ 500 P model is installed on a 3-point chassis.
Training | Aspiration | Flat blowing (meter) | Flow rate (M3/MIN) | Configuration |
Power take-off | 10 meters | 20 | 0.3 to 0.6 | Suction version |
Power take-off | X | 20 | 0.3 to 0.6 | Hopper version |

bottom of page

