Blower hopper equipped for chips
Installation of a noise reduction hood with external control
for greater ease of use
Double turbine blower for pellets and cereals.
This model can be driven by the truck's hydraulics or by a 60kW electric motor or a 75hp thermal motor.
System with one turbine blowing into another to increase the maximum pressure.
The granules are not damaged because they are not pushed by pressure but carried by the air flow.
The rotary sluice valve is adjusted by a hydraulic flow regulator.
The self-contained blower uses multi-strand belts and pulleys for transmissions to the hydraulic pump, blower and motor.
The pipes are 100mm.
On small trucks everything is hydraulic.
Training | Flat blowing | Flow rate (T/Hour) | Configuration |
25 cc. Hydraulic requirement >120L/min | > 40 | 8 to 12 | On dumpster door (noise hood) |
25 cc. Hydraulic requirement >120L/min | > 40 | 8 to 12 | Double door finish (CMD EXT.) |
25 cc. Hydraulic requirement >120L/min | > 40 | 8 to 12 | Approved on-board weighing for double door (on truck chassis) |
75 hp thermal engine | > 40 | 8 to 12 | Double door finish (external control) |
75 hp thermal engine | > 40 | 8 to 12 | Double door finish (order external) + on-board weighing approved (on chassis) |
